How to solve the failure of Glory 80 screen

Glory 80, as a mid-range computer released by Glory in November last year, although its processor performance is not as good as the Pro version, it still inherits the characteristics of the digital series in terms of appearance and image system, that is, fashion and rich. However, recently, many children have encountered screen failure in the use process, either insensitive or too sensitive. What are the solutions to Glory 80?

How to solve the failure of Glory 80 screen? Glory 80 screen failure solution

Investigate the influencing factors and reduce the "inducement" of screen failure. The reason for screen failure is not necessarily damage. In many cases, cleanliness, usage scenarios, charging conditions, and device cache may also affect the sensitivity of the screen. Therefore, when screen problems occur, the following factors can be investigated first.

1. Is there any liquid on the screen

If the surface is accidentally stained with liquid, such as water, oil, etc., the touch screen may jump and be insensitive. It is recommended to dry before use.

2. Whether the plane on which the equipment is placed is too soft

Such as quilt, sofa, etc. Without strong support, when you click on the screen, the screen will be uneven, and there is a certain probability that it will jump randomly. Please change the location and try again.

3. Whether to use the device when charging

Use while charging. If the power supply voltage is unstable, it will cause great interference to the screen and affect the use experience. It is better to use the phone after charging. If you need to use it when charging, please make sure to use the original charger to charge, which can reduce the voltage problem, and at the same time, take off the protective shell to improve the touch experience.

4. Check screen protective film

Too thick protective film will affect the sensitivity of the touch screen. It is recommended to replace the film with a thickness of no more than 0.2 mm or replace the official protective film.

5. Whether the cache has not been cleaned for a long time

If the application and cache have not been cleaned for a long time, the system will respond abnormally. Please observe whether the problem is solved after forced restart.

The screen automatically jumps, and the power supply and third-party application problems need to be eliminated. Without clicking the screen, the screen will automatically jump and touch the screen? That needs to eliminate the power supply and third-party application problems.

1. Troubleshoot power problems

If you have used the Glory standard charger and only charge it at a fixed place, it may be caused by the unstable power supply voltage at this fixed place. Please change it to another place for charging.

2. Eliminate third-party application problems

If this phenomenon occurs only in a third-party application, it may be that the third-party application does not match the device system. It is recommended to uninstall such software.

Device detection, self check touch failure. The screen is not sensitive or jumps randomly. It is also possible that there is a problem with the touch hardware. It is simple and fast to use equipment detection and self-help troubleshooting.

Step 1: Open My Glory App on your mobile phone, and click Device Detection in the self-service section of the service page;

Step 2: When the touch screen is detected, click Start Detection on the interface and operate according to the interface prompts.

If the detection screen is abnormal, it is recommended to back up important data in advance and carry the purchase certificate to the Glory Authorization Service Center for professional maintenance.

If the problem is still unresolved, go to the Glory Authorization Service Center

If the above methods do not help solve the problem, please back up important data in advance, carry your mobile phone, standard charger, data cable and relevant purchase certificate, check and go to the nearby Glory Authorization Service Center for inspection.

After reading the article, I believe that my friends should understand how to solve the problem of Glory 80 screen failure? Because the actual situation is diverse and involves a lot of things, it is better for users in need to first identify the type of their problems, and then subdivide them to find solutions, or go directly to the offline official store to solve them.