What to do if iQOO 10 Pro signal is bad

The iQOO 10 Pro is a phone with very good comprehensive evaluation, so for many children, this phone is their latest choice, and has been used for several months. There are many good functions in it, but all these functions need a good signal from the phone. Once the phone loses the signal, it is no different from a brick, What should I do when iQOO 10 Pro encounters a bad signal?

What to do if iQOO 10 pro signal is bad

The signal status of the mobile phone SIM card is mainly related to the network environment. If the mobile phone has no signal, does not recognize the SIM card, and the signal is poor, you can refer to the following steps and methods to determine the problem:

1. Check the mobile phone protective case

The mobile phone uses metal or magnetic protective covers or supports, which have an impact on the mobile phone signal. It is recommended to take them off and try again.

2. Troubleshooting environmental causes

In some areas, the mobile phone may have no signal or poor signal due to the lack of coverage of the operator's network. It is recommended to compare and judge with other mobile phones of the same operator in the same location.

3. Restart the phone

You can try to restart the phone, let the phone reload the SIM card, and see if the SIM card can be recognized.

4. Check the SIM card

Re install the SIM card, and confirm that the SIM card is consistent with the mobile phone installation logo and in good contact with the mobile phone; If conditions permit, you can replace another SIM card that can be used normally to the phone for comparison to confirm whether it is the phone or the SIM card.

Note: Non all Netcom models only support SIM cards of some operators.

5. Check the phone settings:

① Check flight mode

Check whether there is an "airplane" icon in the status bar of the phone. If there is an "airplane" icon, please enter [Settings] or [Settings> Other Networks and Connections] to turn off "Flight Mode".

② Switch data card

If the phone is installed with dual cards, and one card has no signal, you can enter [Settings> Dual Card and Mobile Network] to switch whether the data card can be restored.

6. Telephone card aging

The mobile phone card has been used for a long time, so you need to take your ID card to the mobile phone business hall to change it

7. Environmental problems

Check whether you are in a parking lot or an enclosed place like an elevator. After you go out, the signal will basically be restored

If the above operations cannot be solved, you can back up the mobile phone data in advance, carry the mobile phone and the purchase voucher to the vivo customer service center for detection, enter the browser to search the vivo official website -- service -- service center -- view all -- select provinces and cities to query the local service center address and contact information.

Does iQOO 10 pro support HIFI

Support

The iQOO10 series supports HiFi sound effects. The HiFi sound effect needs to be turned on manually by the user. The specific operation is: enter the mobile phone settings - Sound and vibration - HiFi to set HiFi on or off. Some models will turn on HiFi by default when the headset is plugged in.

Compared with ordinary sound effects, HiFi sound effects have greatly improved video and game sound effects, which can enable many users to enjoy better sound effects during use. At present, more and more mobile phone models support HiFi sound effect, which is better if it is combined with dual speakers.

If the iQOO 10 Pro signal is not good, you can try the above introduction to try to recover the signal of the mobile phone. You can also find that there are many reasons for the poor signal of the mobile phone, including environmental problems and the problem of the mobile phone itself. So don't worry if the signal is bad, and check it one by one.