Vivo X90 Pro+Enable Application Separation Method

Vivo X90 Pro+has attracted a lot of attention from many small partners recently. Because they want to change their mobile phones, they will naturally be very curious about what they care about. The configuration is an important part, but the details of use are even more interesting. For example, the method of Vivo X90 Pro+to enable application separation can help people improve their work efficiency, which is a good function, Let's have a look at the relevant introduction.

vivo X90 Pro+Enable Application Separation Method

1. Open Settings and click Application and Permission.

2. The application of gold point is separate.

3. Select the app to be separated, and turn on the right switch.

Vivo X90 Pro+Camera Configuration Introduction

Vivo X90 Pro+will use the rear Tsai Si camera, 50MP IMX989 super big bottom main camera+48MP IMX598 big bottom super wide angle+12MP IMX663 portrait lens+48MP IMX598 periscopic super long focus (micro PTZ support), and finally with the support of V2 chip, the overall strength is quite good.

Sony IMX598 may be used for ultra wide angle subphoto, which is also the CMOS polished by vivo for a long time, with 1/2 "48 million pixels, and a 2x long focus portrait subphoto of Sony IMX758 of 50 million pixels, with a size of 1/2.4" and a single pixel of 0.7 μ m. The periscope telephoto sub camera is OV64A

This is how Vivo X90 Pro+enables application separation. Vivo mobile phones have always done a very good job in these details. You can rest assured that if you have relevant requirements, you can try to set them according to the introduction above.