Redmi Note 11E Pro Brushing Tutorial

If you install some improper software when using your mobile phone, it will lead to the instability of the mobile phone system. What's more, even the mobile phone can't be opened to enter the system, so you need to refresh a new system yourself at this time. However, the method of machine brushing is not that simple. Simply connect USB, so the following is the machine brushing tutorial of Redmi Note 11E Pro, which is convenient for everyone to operate.

How does Redmi Note 11E Pro brush? Redmi Note 11E Pro Brushing Tutorial

1. Download and unzip the brush tool, double-click "XiaoMiFlash. exe" to run, click [Driver] to pop up a window, and then click [Install]

2. When the phone is powered off, press and hold the Volume Down+Power button to enter Fastboot mode to connect the phone USB to the computer.

3. After downloading the wire brushing package, unzip it, open the folder of the wire brushing package, and copy the address in the address bar

4. Paste the content of the path you just copied to the path

5. Click to load the device, and the mobile phone will be automatically recognized by the machine brushing program, and then click to start the machine brushing

6. For models with BL locks, "Delete All and Lock" will be selected by default. For models without BL locks, "Delete All" needs to be selected manually

7. Then wait, as shown in the figure, it indicates that the phone has been successfully flushed, and the phone will start automatically.

The above is the machine brushing tutorial of Redmi Note 11E Pro. As long as you follow the operation tutorial brought by the small editor, you can brush your own mobile phone system. Most of the problems you encounter can be solved in the tutorial.